辰东完美世界有声小说,好看的历史书籍推荐,旷世神医

富美家山東總代理淺談復合墻板如何安裝？

來源：http://0473114.cn/ 日期：2021-05-24 發布人：admin

復合墻板的安裝方法是怎么樣的，復合墻板為大家詳解：

How is the installation method of composite wallboard

1.首先要看好設計圖紙，根據放樣的設計圖紙來進一步確認木榫的尺寸和規格，然后再根據圖紙來確定墻面彈線。

1. First of all, we should pay attention to the design drawings, further confirm the size and specification of the tenon according to the lofting design drawings, and then determine the wall snapping line according to the drawings.

2.鉆孔固定需要使用60*M8的膨脹螺絲來做一個穩固，再使用12毫米的鉆頭來進行打孔，孔的寬度大概在45毫米之間。

2. For drilling and fixing, a 60 * M8 expansion screw should be used to make a stable hole, and then a 12mm drill bit should be used to drill the hole, and the width of the hole is about 45mm.
富美家山東總代理

3.將60*M8的膨脹螺絲放在孔里，如果施工現場已經進行到預埋階段需要對隔墻板隔斷軸線的位置放好定位線，然后固定好地面裝飾表面水平和軸線基準點。

3. Put the 60 * M8 expansion screw in the hole. If the construction site has reached the embedded stage, it is necessary to set the positioning line for the partition axis of the partition board, and then fix the horizontal and axis datum points of the floor decoration surface.

4.同時還需要對復合墻板每個跨度之間尺寸復核，經過仔細確認好后再根據設計圖紙立柱水平間距，再對預埋件進行防銹處理的分布，符合要求后使用膨脹螺絲來穩固。

4. At the same time, it is also necessary to recheck the size of each span of the composite wallboard. After careful confirmation, according to the horizontal spacing of the columns in the design drawings, the distribution of the embedded parts should be antirust treated. After meeting the requirements, expansion screws should be used to stabilize them.

富美家山東總代理復合墻板在進行安裝的時候有許多小細節要處理，不過不用太擔心，因?yàn)樵谶M(jìn)行隔墻板隔斷施工的時候隔墻板廠家都會配置熟練的操作工到場。

There are many small details to deal with during the installation of fumeijia Shandong general agent composite wallboard, but don't worry too much, because during the partition board construction, the partition board manufacturers will be equipped with skilled operators.

上一篇：酒店為什么要飾面防火板來做表面裝飾處理！ 下一篇：造成外墻保溫裝飾板老化的因素有哪些？

分類導航

產品中心

聯系我們

成功案例

聯系我們

新聞動態

聯系我們

熱門產品推薦

相關新聞